ADC Intermediate Rigging Practice Exam

These questions are part of the practice quiz. Start practicing

• What is the first step to take if work is required inside the mandated electrical exclusion zone?
• What must be displayed on the data plate of an adjustable brace regarding its WLL?
• What is the difference between static and dynamic loads?
• Why is it important to confirm bracing configurations before lifting?
• Why might a spreader bar be used in rigging?
• What process should be followed to ensure the tower reaches equal balance before use after counterweights are adjusted?
• How is the safe felling distance calculated for winches or pulling mechanisms during demolition?
• Who is permitted inside the exclusion zone when lifting and landing tilt panels?
• How is the minimum exclusion zone for workers alongside the felling line calculated for felling operations?
• Which of the following is a common workplace hazard?
• What is meant by the term "separation distance" in rigging?
• What is the minimum width allowed for packers or shims used to support panels?
• What percentage of chemical anchors must be proof tested to 100% of their WLL?
• What role does communication play in rigging operations?
• What is the purpose of a pre-lift meeting in rigging?
• When is it acceptable to enter the area inside of a lattice boom?
• What must a rigging crew ensure before climbing a tower crane to avoid jamming of the climbing sections?
• Why is a load chart important for crane operations?
• How can a rigger confirm the size and construction of FSWR needed to replace the rope from winches or cranes?
• Why should bolts between the crane and the climbing frame never be adjusted or loosened during the jacking process?
• Why is it important to follow the manufacturer's procedure for installing or removing counterweights from a tower crane?
• What is the mandated exclusion zone for power poles when no ESV spotter is present?
• In a multi-crane lift using stationary slewing cranes, what is one important thing a rigger should ensure during the operation?
• What is the primary goal of a pre-lift meeting?
• When using multiple slings to lift a load, which factor is NOT relevant?
• What is the purpose of personal protective equipment (PPE) in rigging operations?
• What is a block and tackle system?
• What is the key advantage of planning a multi-crane lift as a "luffing up" operation?
• What is one acceptable method of communication between a rigger and a machine operator?
• What is the effect of a load being unbalanced during a lift?
• Which two methods are acceptable for securing or tying tower sections to a structure when erected internally?
• Which documented source provides information on the number of cantilevered sections of lattice boom that can be fitted before installing pendants?
• What is a potential hazard when layers of wire rope are not properly managed on a winch drum?
• In rigging practices, what does maintaining tension on wire rope help to prevent?
• Where can a rigger find all the relative crane component weights?
• Who on a work site is qualified to communicate from within the tower to the crane operator during jacking operations?
• What hazards should be assessed before starting rigging operations?
• What is a primary purpose of using 'marker balls' in work zones?
• What is the best description of “rigging gear”?
• Why is it important for all team members to have the same information during demolition operations?
• Why must the bottom pins be removed first when dismantling a lattice boom?
• What strategy can be utilized to ensure effective communication in hazardous environments like demolition?
• What is the significance of “load angle” in lifting operations?
• Which hazard may be present around workers in a busy rigging site?
• What should you do if you notice damage to rigging gear?
• What type of rigging component can be used between two cranes sharing a load that cannot be lifted individually?
• What is one obligation an employer must meet regarding workers’ safety?
• Why should the crane operator monitor the load moment indicator when lifting tilt panels?
• What does the term "rigging torque" refer to?
• Why is it important to have an understanding of operational protocols in rigging?
• What must be fitted to turnbuckles used for tensioning counterweights to prevent loosening?
• Which of the following could result from improperly fitting boom pins?
• Why is clear communication important during rigging operations?
• What is the purpose of retaining devices on adjustable brace locking pins?
• What is the consequence of not assessing the ground bearing pressure of a load?
• Which practice helps in managing load shifts effectively?
• What is the primary function of a pull lift in rigging?
• What should be prioritized to enhance safety measures during a demolition project?
• Why are proper hand signals important in rigging?
• What is a key element in ensuring safety communication during high-risk tasks like demolition?
• Why is it necessary to luff the boom to its minimum radius when adjusting 'travelling type' counterweights?
• Which consideration is essential when planning rigging tasks?
• What is an essential consideration for accessing rigging tasks smoothly?
• Why is it vital to confirm ground conditions when performing rigging tasks?
• What is the primary action to prevent crushing, pinching, or diving of wire rope on a multi-layered winch drum?
• How often are clutches used for lifting tilt panels to be proof tested?
• What is the purpose of a tag line in the rigging process?
• What types of cranes are commonly used in rigging operations?
• What is a commonly used item of rigging equipment for lifting tilt-up concrete panels?
• Why should pins never be fitted or removed while the rigger is inside or below the structure of the lattice boom?
• During lifting operations, what should be maintained at all times?
• Which item is NOT typically required for lifting tilt-up concrete panels?
• What does the term 'Hazard' refer to in a workplace context?
• What is an essential safety measure while rigging operations?
• During a multi-crane lift using mobile articulating pick and carry cranes, what should a rigger prioritize?
• Which safety measure should be taken when installing counterweights?
• What role does equipment choice play in rigging stability?
• What can happen if a crane operator disregards the specified cantilever section limits?
• Why is dry natural fibre rope preferred for use as a tag line?
• Which of the following best describes the role of effective communication in rigging?
• When should you replace worn slings?
• Which of the following documents is NOT typically included in workplace safety regulations?
• How can maintaining load tension on wire ropes benefit lifting operations?
• What is “side loading,” and why is it a concern?
• What is the role of a hoisting system?
• Why is tagging and labeling rigging equipment important?
• What are the primary components of a chain hoist?
• Prior to releasing the supporting crane hook from a placed tilt panel, what must be confirmed?
• What is bridle rigging?
• What does "overloading" mean in a rigging context?
• What is the maximum angle for lifting with slings before it compromises safety?
• Why is it important to inspect rigging equipment before use?
• What is a load cell used for in rigging?
• What action can a state safety regulator take if a worker is found operating unsafely under a high-risk work licence?
• Why is it important to observe temperature ratings for rigging equipment?
• Which of the following factors does NOT affect the selection of rigging equipment?
• What is typically included in a lift plan?
• What is the purpose of a rigging certification?
• What action should be taken if one crane experiences a problem during a multi-crane operation?
• Who determines the free-standing height of a tower crane before it requires tying to a supporting structure?
• What is a potential consequence of ignoring temperature ratings for rigging materials?
• Which rigging technique can help guard against components of a structure falling uncontrollably during demolition?
• If participating in a multi-crane lift operation of 4 or more cranes, what percentage of the load share must be added to each crane’s capacity?
• When lifting a panel, what direction should it face to prevent potential accidents?
• Before assigning a rigger to unfamiliar tasks, what is NOT needed from the employer?
• Why is it essential for a crane operator to monitor information from a load moment indicator during a multi-crane lift?
• How do load characteristics impact rigging decisions?
• What is a swivel in rigging?
• What can happen if proper load testing is not performed on rigging equipment?
• What type of training is generally required for riggers?
• How can the overall safety of a multi-crane lift be enhanced during the operation?
• Which type of concrete components require a safety factor of 2.25 for lifting and bracing inserts?
• What is the primary purpose of using locking plates on turnbuckles?
• How do you calculate the total weight of a load?
• The possibility of injury from a hazard is defined by which factor?
• What is the primary function of rigging in lifting operations?
• Why is effective communication essential during demolition tasks?
• What is the impact of temperature on rigging equipment?
• In rigging, what does the term "load" refer to?
• Why is load testing important for rigging equipment?
• What does the center of gravity (CG) indicate in rigging?
• What role does a Derrick play in rigging applications?
• What part of the climbing frame supports the incoming tower section after a tower has been raised?
• What types of knots are most commonly used in rigging?
• Which of the following best describes the consequence of not maintaining load tension on the wire rope?
• For demolition operations, what is the minimum diameter of the fiber rope used for felling operations?
• Which task is NOT typically performed by a Qualified Intermediate Rigger?
• Which of the following materials are commonly used for making synthetic slings?
• Which document is NOT typically used for workplace safety information?
• How would a rigger determine the acceptable safe wind speed required for climbing a tower crane?
• What role does a "signal person" play during rigging operations?
• How can load shifts during lifting be mitigated?
• How does assessing the risk of a rigging operation contribute to safety?
• Which of the following enhances mechanical advantage in a rigging system?
• What is one disadvantage of using whistle signals on a rigging site?
• What is an essential communication practice during a multi-crane operation?
• What is the maximum height a panel can be shimmed or packed from its final resting surface?
• What are the three immediate actions to take when unsafe conditions are identified during demolition?
• What is a potential consequence of failing to properly tension braces on tilt panels?
• What is the purpose of a shackle in rigging?
• Which of the following would not be considered a potential hazard in rigging?
• Why is stable rigging setup critical during lifting?
• What is the minimum diameter of an 80-grade felling chain used for demolition purposes?
• What should be observed to prevent rigging equipment failures?
• When lifting lattice boom sections for erection or dismantling, where should slings be attached?
• Which method is NOT used to highlight the position of powerlines in work zones?
• What do “dead weight” and “live load” refer to in rigging?
• How do synthetic slings differ from metal slings?
• What does the term "working load limit" (WLL) refer to?
• How can one ensure the safety of personnel when rigging?
• What does the term "fall protection" refer to in rigging?
• Which factor is crucial for ensuring safe lifting operations?
• Why is it important to fit boom pins from the inside of the chord to the outside?
• What percentage of capacity must be added to the minimum WLL of various lifting equipment for demolition operations?
• How does temperature affect the safety of rigging operations?
• Why is maintaining load stability critical in rigging?
• What is the function of an eye bolt in rigging?
• Which document indicates the requirements for demolishing a structure supported above a post-tensioned beam?
• What is an advantage of using radios for communication on a rigging site?
• Who should be consulted prior to loading or installing a pre-stressed beam?
• Who determines the spacing between vertical ties to secure an external tower crane to a structure?
• Which practice is not advisable to maintain rigging quality?
• What is a primary consideration when determining lift capacity?
• What safety measures are essential when operating near public areas?
• In a multi-crane lift operation with 2 cranes, what percentage of the load share must be added to each crane's capacity?
• What is the primary purpose of a rigging plan?
• Before lifting a load, who should be informed of their responsibilities?
• What is one of the primary goals when managing wire rope on a winch drum?
• What is the primary concern when luffing down during a multi-crane lift?
• What is the required safety factor for lifting and bracing inserts in concrete components?
• What is the importance of inspecting rigging equipment before use?
• During a demolition task, what is the main reason for having effective teamwork?
• In the context of workplace safety, what does 'ESV' stand for?
• What should a rigger ensure during a multi-crane lift operation regarding movements?
• Which of the following is a requirement of the "Duty of Care" legislation?
• What document should workers follow to ensure safety during demolition operations?
• What should workers avoid to prevent operational hazards when using wire ropes?
• How can wind conditions affect rigging operations?
• What function does a hoisting block serve in rigging?
• What is a key factor in selecting rigging equipment for a job?
• What must be ensured to improve communication during lifting operations?
• Why is weight distribution crucial in rigging operations?
• When would riggers be required to set the guides in the climbing frame to their minimum extension?
• What must be fitted to flanged boom pins once they are installed?
• What is a “lift plan”?
• In what way can communication prevent accidents during lifting operations?
• What can result from overloading rigging equipment?
• How does the angle of rigging affect load distribution?
• Which document provides the required amount of bracing and their acceptable fitment tolerances?
• Which of the following materials is commonly used for making slings?
• Which scenario poses the highest risk in rigging?
• What must be fitted to adjustable brace locking pins?
• During a multi-crane lift operation with 3 cranes, what percentage of the load share must be added to each crane's capacity?
• What issue can arise from improper handling of wire rope during lifting operations?
• What should be obtained before performing work inside an electrical exclusion zone?
• What hazard is associated with lifting pre-stressed or tensioned beams that have rolled onto their side?
• What is a crucial factor when lifting a load with slings?
• What risks occur when lifting against suction under panels being raised?
• What is the primary responsibility of a rigger in construction?
• What is the recommended distance for the exclusion zone around a transmission tower with no ESV spotter present?
• Which type of equipment is primarily affected by shock loading during lifting operations?
• What can be done to enhance the stability of rigging setups?
• What is meant by "shear force" in the context of rigging?
• What is a winch in the context of rigging, and how is it used?
• Define the term "ground bearing pressure" in rigging.
• Why would the guides need adjustment during the jacking process?